Vaillant ecoTEC plus 825 Boiler Replacement and Hive Heating Zones in Lonsdale, Stevenage SG1

New Vaillant ecoTEC plus 825 combi boiler installed above the worktop in Stevenage

Boiler replacement and heating controls · Lonsdale, Stevenage SG1

Now the underfloor heating can run without the radiators.

What started as an emergency call-out for an intermittent boiler fault ended with a replacement Vaillant combi and two separately controlled heating zones. TNG Services Ltd carried out the work at a home in Lonsdale, Stevenage, Hertfordshire.

From an intermittent Ideal boiler fault to a Vaillant replacement

We traced the fault on the existing Ideal Exclusive combi to its printed circuit board (PCB). We discussed replacing the board, but given the age of the boiler, the customer chose to replace the appliance.

The customer wanted a premium combi, so we recommended the Vaillant ecoTEC plus 825. It has an ErP A efficiency rating, a stainless steel heat exchanger and modulating output, allowing the boiler to adjust how much heat it supplies as demand changes. Read more about our Vaillant boiler installation, servicing and repairs.

Two heating zones with separate Hive control

The existing system had underfloor heating and radiators, both controlled by a single thermostat. The customer wanted to run the underfloor heating independently.

We added a zone valve and an additional Hive thermostat. The thermostat lets its zone request heat independently, and the zone valve controls the flow of heating water to its circuit.

Each area can now be set to suit how it’s used. The customer can warm the floor while leaving the radiator circuit off.

Underfloor heating manifold and copper pipework at the Lonsdale property
The underfloor heating manifold and its pipework.
Zone 1: Underfloor heating

Can call for heat without running the radiators.

Zone 2: Radiators

Has separate temperature control and can stay off when heat is not needed.

Testing and completing the installation

The finished upgrade combined the new Vaillant ecoTEC plus 825 with the independent underfloor heating control the customer had asked for. If you’re planning a similar upgrade, see our boiler installation and replacement in Stevenage page.

Planning a boiler or heating controls upgrade in Stevenage?

TNG Services Ltd investigates boiler faults and carries out boiler replacements, Hive thermostat installations and heating zoning across Stevenage SG1 and SG2, Hertfordshire and North London.

Contact TNG Services to discuss your heating