Gas Pipe Alteration for a Dual Fuel Cooker in Stevenage SG1

Relocated gas bayonet connection in the cupboard beside the cooker recess

Gas pipe alteration · Stevenage SG1, Hertfordshire

Making room for a replacement dual fuel cooker.

TNG Services Ltd visited a home in Stevenage to prepare an existing kitchen for a freestanding cooker with a gas hob and electric oven. The work covered rerouting the copper gas pipe and moving the bayonet connection out of the cooker recess.

Why the original connection needed moving

The original copper pipe ran across the tiled wall behind the cooker space and projected into the recess. A replacement appliance can have a different rear profile and gas inlet position. Those differences matter: pipework can stop the cooker sitting correctly, and the flexible hose needs space so it cannot become trapped.

Tape measure beside the original gas pipe in the cooker recess
Assessing the original pipe position in the cooker recess.
Rear panel of the replacement freestanding dual fuel cooker
The back of the replacement appliance.

Moving the bayonet connection into the adjacent cupboard

We rerouted the copper pipework and repositioned the bayonet connection in the adjacent cupboard area. This cleared the projecting pipe from the cooker recess and gave the installer more room to position the new appliance.

Original copper gas pipe projecting across the tiled cooker recess
Before: copper pipework projected into the cooker recess.
Tiled cooker recess after the projecting gas pipe was removed
After: the projecting pipework was cleared from the recess.
Relocated gas bayonet connection in the cupboard beside the cooker recess
The relocated bayonet connection in the adjacent cupboard.

What still needs checking before the cooker is used?

The clearances beside and above the cooker need to be assessed separately against the instructions for the exact appliance and any extractor hood. The installer also needs to check that the hose is protected from damage and heat and that the connection is accessible for disconnection and maintenance.

Gas pipework alterations and cooker gas connections should be handled by a Gas Safe registered engineer qualified for the work. The engineer needs to carry out the applicable gas safety checks, including checking the altered pipework for gas tightness. The electrical supply must also be suitable for the appliance.

Replacement freestanding dual fuel cooker with a gas hob in a Stevenage kitchen
The replacement cooker, shown before being moved into position.

Replacing a gas or dual fuel cooker in Stevenage?

TNG Services Ltd provides gas pipe alterations and cooker installation services in Stevenage SG1 and SG2, across Hertfordshire and in North London. Get in touch to discuss the existing gas supply, connection position and requirements for your replacement appliance.

Contact TNG Services to arrange an assessment